Onsite Support Services: What a Visit Costs Once Travel Is Counted

An onsite visit costs more than the repair. See a worked example that adds drive time, mileage at the 2026 IRS rate, and a minimum visit charge.

Van with a map pin and a stopwatch beside a cost ledger, titled Onsite Support Services: What a Visit Costs Once Travel Is Counted

Onsite Support Services: What a Visit Costs Once Travel Is Counted

Onsite support services are in-person visits from a technician to fix hardware, wiring, or network problems that remote work can't solve. A visit can cost more than the repair itself when a provider charges for drive time, mileage, trip fees, or a minimum billing period. The worked example below is a planning scenario, not BrightPrompt's travel policy or a customer quote.

What does an onsite visit actually bill?

An onsite bill usually has four parts: travel time, mileage, the time spent on site, and any minimum that applies to the visit. Impli-cit's guide to hidden onsite IT costs names travel expenses and minimum billing increments among the most common charges that surprise small businesses. Each line can be small on its own. Together they can cost more than the fix.

Travel rules vary a lot. Some providers bill the drive at the full hourly rate. Others charge a flat trip fee. A few bill travel at a lower rate and count it against a minimum. None of these choices is wrong, but you should know which one you're buying before a technician leaves the shop.

How do you add up a 30-minute fix that becomes a multi-hour bill?

BrightPrompt facts vs. planning example

Verified BrightPrompt facts: the $99 monthly retainer includes up to one hour of remote or onsite support, and additional time is $129 per hour. Availability is confirmed for the request. BrightPrompt does not publish travel-time, mileage, trip-fee, or minimum-visit rules, so those details must be confirmed before a visit.

Planning example only: the distance, drive time, mileage charge, and one- or two-hour minimum below are hypothetical assumptions. The $312.94 and $441.94 totals are not BrightPrompt quotes.

Here's an illustrative visit. A technician drives 22 miles each way to a small office where a wireless access point has failed. The drive takes 35 minutes each way, so 70 minutes of travel. The repair takes 30 minutes on site. For comparison, the example uses $129 per hour and assumes a one-hour or two-hour minimum.

LineBasisOne-hour minimumTwo-hour minimum
Travel time70 minutes at $129/hour$150.50$150.50
On-site laborBilled to the minimum$129.00 (1 hour)$258.00 (2 hours)
Mileage44 miles at $0.76$33.44$33.44
Visit total$312.94$441.94

In this planning example, the repair takes half an hour, but the assumed minimum turns it into a full hour, and the assumed two-hour minimum adds another $129. A minimum can cover a provider's time to prepare for a visit, but it shifts more of the cost of a short job onto the customer. Ask whether a minimum applies before you schedule the work.

What is the mileage line really worth?

The IRS sets the standard business mileage rate each year, and it changed mid-2026. The IRS says the rate is 72.5 cents per mile from January 1 through June 30, 2026, and 76 cents per mile from July 1 through December 31, 2026. For an October visit, 76 cents is the right benchmark. It's the amount the IRS allows a business to deduct for operating a vehicle, so it works as a reasonable floor for what a provider spends per mile. It isn't the price a provider has to charge, and some pass the cost through at actual rates while others fold it into a flat fee.

At 44 round-trip miles, the mileage line is $33.44. That's small next to the labor, which is why travel time, not gas, usually drives the bill for a nearby site. Over a year, a site that needs three visits a month pays $938.82 per month at the one-hour minimum, or $11,265.84 a year, before any parts.

Does a retainer change the math?

It can, but only after the visit is scoped. BrightPrompt's consulting page says the $99 monthly retainer includes up to one hour of remote or onsite support, with additional work billed at $129 per hour. Availability is confirmed for the request. The site does not publish rules for travel time, mileage, trip fees, or minimum visits, so confirm each item before treating the included hour as the total visit cost.

A retainer changes the question from "what is the headline hourly rate?" to "which parts of this visit use the included hour, and which costs sit outside it?" Get that answer in writing for the actual location and request.

What should you get in writing before the first visit?

Five details decide the bill, and none of them show up in the headline rate:

  1. The minimum visit length. One hour and two hours produce very different totals for a short repair.
  2. How travel is billed. Ask whether drive time bills at the full rate, a reduced rate, or not at all.
  3. Mileage or trip fees. Ask for a per-mile rate or a flat trip charge, and whether it's capped.
  4. Which hours count. Confirm whether an onsite visit uses up the included retainer hour, and whether an after-hours visit costs more.
  5. Response time. A visit that starts four hours after the call is a different service from one that starts within the hour. Our on-site support comparison walks through the four delivery models and what each costs.

If you want the step-by-step process for setting up onsite coverage, read our onsite IT support how-to guide.

Frequently Asked Questions

How much does an onsite IT support visit cost?

It depends on drive time, mileage, and the minimum the provider bills. In the example above, a 30-minute repair 22 miles away costs $312.94 with a one-hour minimum at $129 per hour. Ask for the minimum visit length and the travel rule in writing before you book.

What is the IRS mileage rate for 2026?

The IRS business standard mileage rate is 72.5 cents per mile from January 1 through June 30, 2026, and 76 cents per mile from July 1 through December 31, 2026, according to the IRS. Providers use it as a cost benchmark, but they set their own mileage charges.

Does a retainer include onsite visits?

BrightPrompt's $99 retainer includes up to one hour of remote or onsite support, but availability is confirmed for the request. The site does not publish travel-time, mileage, trip-fee, or minimum-visit rules, so confirm those terms before treating the included hour as the full cost.