On-Site IT Support: A Worked Example With Real Numbers

On-site IT support is in-person help for hardware and network problems phones can't fix. See a real cost and response-time example for a 14-person office.

Technician icon and cost breakdown ledger beside a clock, titled On-Site IT Support Worked Example With Real Numbers

On-Site IT Support: A Worked Example With Real Numbers

On-site IT support is a technician physically coming to your location to fix hardware, network, or wiring problems that can't be solved over the phone or screen share. The two numbers that decide whether it's worth paying for are response time and cost per hour, and both vary a lot by provider. Below is a real worked example, a 14-person office with a dead network switch, run through the actual math so you can see where the cost comes from instead of guessing at it.

The Scenario

A 14-person dental office loses its internal network at 9:10 a.m. The front-desk scheduling software, the card reader, and two exam-room workstations all go dark at once. A phone call confirms it's not an internet outage, it's a failed network switch in the server closet, which means someone has to physically swap the hardware. This is the exact situation that separates remote-only IT support from a plan that includes on-site dispatch.

TimeEventWho's involved
9:10 a.m.Network drops, staff calls IT supportFront desk
9:15-9:30 a.m.Remote technician confirms it's hardware, not ISP or softwareRemote support
9:30-11:30 a.m.On-site dispatch window (metro area)Field technician
11:30 a.m.-12:15 p.m.Switch replaced, cabling re-tested, systems back onlineField technician
Total downtime~3 hours-

The Math Behind the Numbers

Remote triage on a managed plan typically starts within 15 to 30 minutes of the call, while on-site dispatch for an urgent issue runs 2 to 4 hours in metro areas and 4 to 8 hours in rural ones, according to response-time data compiled by Kelser Corp and AWD IT Solutions. In this example, the office is in a metro area and lands at the fast end of that window: roughly 3 hours from first call to systems back online, which lines up with the 2-to-4-hour onsite figure.

On the cost side, a typical small business loses $1,000 to $5,000 for every hour its systems are down, according to the Erwood Group's 2025 downtime cost analysis. At the low end of that range, 3 hours of downtime costs the practice roughly $3,000 in lost scheduling, billing, and staff time, before the repair bill is even added. That's the number that makes the response-time gap between "next business day" and "same morning" worth paying for.

What the Repair Itself Costs

Pricing for the actual technician visit depends on the billing model. Hourly break-fix work typically runs $100 to $200 an hour, according to Clutch's 2026 IT services pricing guide, so a 45-minute onsite repair like the switch swap above lands around $75 to $150 in labor, plus the cost of the replacement switch itself. On a flat per-user managed plan, that same call is usually already covered: Datapath's 2026 managed IT services pricing guide puts flat per-user managed IT at $100 to $250 per user per month for most small and midsize businesses, which typically bundles a set number of support hours, including onsite dispatch, into the monthly fee.

BrightPrompt Consulting's own version of that flat model is a $99 monthly retainer covering up to one hour of work, remote or onsite, with additional time billed at $129 an hour. Run the dental office example through that pricing: the 45-minute repair fits inside the included hour, so the practice pays $99 for the month and avoids the $3,000-plus downtime cost by getting a technician there within the metro dispatch window instead of waiting a day.

Remote vs. Onsite: Where the Line Actually Falls

Not every ticket needs a body in the building. Software errors, password resets, and most network configuration issues get solved remotely inside that 15-to-30-minute window. The tickets that force an onsite visit are the ones with a physical cause: a dead switch, a miswired point-of-sale terminal, a server that won't power on, or cabling damaged during an office move. Before you sign with any provider, ask them to walk through a scenario like this one and tell you exactly where remote support ends and the dispatch clock starts.

Running the Same Math for Your Business

  • Estimate your hourly downtime cost. Even a rough number, lost sales, idle staff, missed appointments, tells you what speed is worth paying for.
  • Ask for both response numbers in writing. Remote response time and onsite dispatch time are two different SLAs; get both.
  • Compare flat vs. hourly against your actual ticket volume. If you'd hit the included hours most months, a flat retainer beats paying $100 to $200 an hour piecemeal.
  • Confirm your region is covered for same-day dispatch. Metro and rural response windows differ by hours, not minutes.

If you're weighing a retainer against hourly billing, BrightPrompt Consulting's support page lays out the same $99/month, $129/hour structure used in the example above, alongside a one-time $299 tech audit for businesses that want a baseline before committing.

Frequently Asked Questions

What counts as on-site IT support versus remote support?

On-site support means a technician is physically at your location, which is required for hardware failures, wiring, network switches, and equipment that won't power on. Remote support covers software issues, configuration, and anything solvable over a screen share, and it's typically faster to start, within 15 to 30 minutes on a managed plan.

How much does an on-site IT visit cost?

On an hourly break-fix basis, expect $100 to $200 an hour, according to Clutch's 2026 IT services pricing guide. On a flat monthly retainer, the visit is often included in the monthly fee up to a set number of hours; BrightPrompt Consulting's retainer is $99 a month for up to one hour, with $129 an hour after that.

How long does on-site dispatch actually take?

For urgent issues, on-site dispatch typically runs 2 to 4 hours in metro areas and 4 to 8 hours in rural areas, based on data compiled by Kelser Corp and AWD IT Solutions. Ask any provider for their specific numbers by region before you sign.

Is a flat monthly plan actually cheaper than paying per incident?

It depends on your ticket volume. If your office calls for help more than once or twice a month, a flat plan like Datapath's cited $100-to-$250-per-user-per-month range usually costs less than repeated $100-to-$200-an-hour break-fix visits, and it includes proactive monitoring that catches some problems before they cause downtime.

Does downtime cost really justify paying for faster response?

Usually, yes. A typical small business loses $1,000 to $5,000 per hour of downtime, according to the Erwood Group's 2025 analysis. Even a few hours saved by a faster onsite response window can cover a full year of a flat-rate retainer.

Run your own numbers the same way: estimate your downtime cost per hour, then compare it against the response time and price your current provider actually offers in writing. BrightPrompt Consulting publishes its $99/month retainer, $129/hour overage rate, and $299 tech audit upfront for exactly that reason. For a broader comparison of support models, see our post on comparing emergency IT support options.